You can add to or remove the points that make up a line through the Spatial tab in the Model Feature window.
Through the Identification tab in the Model Feature window, you can change the name or description of a line at any time. |
Adding or removing points
To add or remove points, perform the following steps:
1. In the Model window, select the line you want to modify or superselect it in the Display window.
The selected line is now the active reference model feature.
2. Select the Spatial tab in the Model Feature window.
3. Do one of the following:
• Click Add to launch the Add to Line dialog box and select a point to add to the line.
• Select a point, and click Remove to remove that point from the line.
Adding a depth value to a point
You can add depth to the points in a line on the Depths tab in the Model Feature window. A line is not complete until every point of the line has a depth value.
The names for this tab and the elevation column will change based on the Z-axis convention setting. "Depth" is used when the Z-axis convention is positive down, "Height" when the convention is positive up. |
1. For a point in the list, select the Depth field.
The Depth field for the selected point is highlighted.
2. Type a depth value.
3. Press <Enter>.
The depth value for the selected point is set (the next point in the line is highlighted automatically).
4. [Optional] To set other depth values for other line points, repeat steps 1 through 3.
5. [Optional] To set all points with the same depth value right-click over the point depth value you want to apply to the other points of the line and, from the pop-up menu, select the Make Horizontal command.